1 e3z-b pet bottle and clear material photoelectric sensor sensor with built-in amplifier reliably detects transparent pet bottles and clear materials utilizes omron?s unique optical system (?inner view?) to detect various shapes of pet bottles and transparent objects detects a wide range of bottles: from 500-ml to 2-liter size; detects single bottles or stacked bottles provides a high degree of protection (ip67) mutual interference protection ce approved high degree of noise immunity light-on/dark-on switch-selectable ordering information standard models note: 1. the reflector is sold separately. 2. the specified sensing distance is possible when the e39-r1s or e39-r1k reflector is used. figures in parentheses indicate the minimum distance between the sensor and the reflector. this also applies to the table on reflectors (in accessories, below). 3. prewired models with either a 0.5-m or 5-m cable are available. when ordering, specify the cable length by adding the code ?0.5m? or ?5m? to the part number (e.g., e3z-b61 0.5m). accessories (order separately) reflectors brackets to order brackets, you?ll find the complete list of appropriate brackets for the e3z-b when you refer to the basic e3z photoele ctric sensor data sheet on omron?s web site @www.omron.com/oei, or refer to the sensing products catalog. m8 connectors to order m8 connectors, simply refer to the basic e3z data sheet in the sensing products catalog or on omron?s web site @www.omron.com/oei for a quick, accurate and complete list of connectors available for the e3z-b photoelectric sensor. note: all brackets and connectors are common for all e3z models. sensing method appearance (see note 1.) connection method sensing distance (see note 2.) part number npn output pnp output retroreflective (without msr function) (see note 1.) prewired (see note 3.) e3z-b61 E3Z-B81 m8 connector e3z-b66 e3z-b86 prewired (see note 3.) e3z-b62 e3z-b82 m8 connector e3z-b67 e3z-b87 500 mm (80 mm) 2 m (100 mm) type sensing distance (typical) rated value part number e3z-b ! ! ! ! 1/-b ! ! ! ! 6 e3z-b ! ! ! ! 2/-b ! ! ! ! 7 standard reflector e39-r1s reflector with fog-prevention coating e39-r1k 500 mm (80 mm) 2 m (100 mm) (reflectors are not provided with the e3z sensor. order separately.)
2 e3z-b e3z-b specifications ratings/characteristics note: figures in parentheses indicate the minimum distances required between the sensors and reflectors. engineering data parallel operating range (typical) e3z-b and e39-r1s (reflector) receiver output vs. distance (typical) e3z-b and e39-r1s (reflector) item sensing method retroreflective (without msr function) npn output e3z-b61 e3z-b66 e3z-b62 e3z-b67 pnp output E3Z-B81 e3z-b86 e3z-b82 e3z-b87 sensing distance 500 mm (80 mm) using e39-r1s (see note.) 2 m (100 mm) using e39-r1s (see note.) standard sensing target 500-ml (65-mm dia.) transparent round pet bottles hysteresis approx. 3% light source (wave length) red led (680 nm) power supply voltage 12 to 24 vdc 10% including 10% (p-p) max. ripple current consumption 30 ma max. control output load power supply voltage: 26.4 vdc max. load current: 100 ma max. (residual voltage: 1 v max.) open-collector output (npn or pnp depending on model) l-on/d-on switch-selectable circuit protection protection from reversed power supply connection, output short-circuit, and mutual interference protection response time operation or reset: 1 ms max. sensitivity adjustment one-turn potentiometer ambient illumination (receiver side) incandescent lamp: 3,000 lux max. sunlight: 10,000 lux max. ambient temperature operating: ?25 c to 55 c (?13 f to 131 f) storage: ?40 c to 70 c (?40 f to 158 f) with no icing or condensation ambient humidity operating: 35% to 85%; storage: 35% to 95% (with no condensation) insulation resistance 20 m ? min. at 500 vdc dielectric strength 1,000 vac, 50/60 hz for 1 min vibration resistance 10 to 55 hz, 1.5-mm double amplitude or 300 m/s 2 for 2 hours each in x, y, and z directions shock resistance 500 m/s 2 3 times each in x, y, and z directions degree of protection ip67 (iec60529) connection method prewired cable (length: 2 m, 5 m, or 500 mm) m8 connector prewired cable (length: 2 m, 5 m or 500 mm) m8 connector indicator operation indicator (orange); stability indicator (green) weight (as packed) approx. 65 g (2.29 oz.) approx. 20 g (0.71 oz.) approx. 65 g (2.29 oz.) approx. 20 g (0.71 oz.) material case pbt (polybutylene terephthalate) lens methacrylate resin accessories instruction manual (reflector and mounting bracket are sold separately.) distance x (m)
3 e3z-b e3z-b operation npn output pnp output model e3z-b61/-b66/-b62/-b67 output transistor status light on dark on timing chart mode selector light on (l/on) dark on (d/on) output circuit model E3Z-B81/-b82/-b86/-b87 output transistor status light on dark on timing chart mode selector light on (l/on) dark on (d/on) output circuit nomenclature e3z-b6 ! ! ! ! e3z-b8 ! ! ! ! sensitivity adjuster operation indicator (orange) stability indicator (green) v operation selector (between brown and black) (between brown and black) (between brown and black) (between brown and black)
4 e3z-b e3z-b structure of sensor i/o connector xs3f-m421-405-a xs3f-m422-402-a xs3f-m422-405-a xs3f-m421-402-a wire color brown white blue black classification wire color connector pin no. use dc brown 1 power supply (+v) white 2 pin 2 is not used. blue 3 power supply (0 v) black 4 output dimensions unit: mm (inch) sensors retroreflective models (prewired models) accessories (ordered separately) retroreflective models (connector models) 20 (0.79) 12.45 (0.49) 8.8 (0.35) 4.3 (0.17) 10.8 (0.43) stability indicator (green) stability indicator (orange) mode selector sensitivity adjuster two, m3 18 (0.71) emitter 15.5 (0.61) 17 (0.67) 25.4 (1.00) optical axis receiver two lenses, 7 (0.28) dia. insulator diameter: 1.1 mm.) (1.22) 31 standard length: 2 m. * 3.75 for e3z-b @2 4-dia. 3-core vinyl-insulated round cable (conductor cross-section: 0.2 mm 2 ; (0.13) 3.2 material surface: acrylic resin backside: abs resin reflectors e39-r1s e39-r1k 34 (1.34) 52 (2.05) 40.3 (1.59) (2.36) 59.9 2.7 (0.11) 7.5 1.6 (0.07) (0.30) e3z-b6 @ @ @ @ 4.3 (0.17) sensitivity adjuster mode selector 20 (0.79) 12.45 (0.49) 25.4 ( 1.00) 18 (0.71) 15.5 (0.61) 17 (0.67) two lenses, 3.2 (0.13) 10.8 receiver optical axis m8 connector 9.75 (0.38) emitter stability indicator (green) 31 7 (0.28) dia. operation indicator (orange) (1.22) (0.43) * 3.75 for e3z-b @7 brackets for bracket dimensions, refer to the basic e3z photoelectric sensor data sheet on omron?s web site @www.omron.com/oei, or refer to the e3z in omron?s sensing products catalog. m8 connectors for dimensions of the m8 connectors, refer to the basic e3z data sheet in the sensing products catalog, or see e3z on omron?s w eb site @www.omron.com/oei.
5 e3z-b e3z-b precautions wiring power supply voltage make sure that the power supply to the sensor is within the rated voltage range. load short-circuiting do not short-circuit the load, or the sensor may be damaged. polarity correct polarity wiring is required to prevent damage to the sensor. connection without load do not connect the power supply to the sensor with no load connected, or the internal elements may explode or burn. operating environment do not use the sensor in locations with explosive or flammable gas. settings power reset time when the e3z-b is turned on, there is a 100 ms delay before operation. if the load and the sensor are connected to indepen- dent power supplies, be sure to turn on the sensor before turning on the load. connections m8 metal connector turn off power before disconnecting the sensor. remove the connector cover before connecting or disconnecting the metal connector. secure the connector cover by hand. do not use any pliers, or the connector may be damaged. the proper tightening torque range is between 0.3 and 0.4 n " m. to ensure safe sensor operation, please follow these precautions. e3z-b6 ! ! ! ! e39-l104 mounting bracket (sold separately)
e3z-b e3z-b all dimensions shown are in millimeters. to convert millimeters into inches, multiply by 0.03937. to convert grams into ounces, multiply by 0.03527. cat. no. cedsax4 printed in usa omron canada, inc. 885 milner avenue scarborough, ontario m1b 5v8 416-286-6465 omron electronics llc one east commerce drive schaumburg, il. 60173 1-800-55-omron omron on-line global - http://www.omron.com usa - http://www.omron.com/oei canada - http://www.omron.com/oci 11/01 specifications subject to change without notice
|
